How to decode a 1998 Chrysler Cirrus VIN

Characters 1-3 of a 1998 Chrysler Cirrus VIN

World Manufacturer Identifier (WMI) codes are unique three-letter or digit sequences assigned to each vehicle manufacturer globally and form the beginning of the Vehicle Identification Number (VIN). These codes not only identify the manufacturer but can also provide information about the vehicle type and the country of manufacture. For example, the WMI “1C3” is designated to FCA US LLC, a manufacturer located in Auburn Hills, Michigan, United States, indicating that the vehicle is a passenger car. This code is particularly relevant for vehicles produced by the manufacturer between 1995 and 2000. Hence, a Chrysler Cirrus from 1998 bearing a VIN starting with “1C3” distinctly marks it as a vehicle made by FCA US LLC in the United States, intended for use as a passenger car.

List of WMI Codes for a 1998 Chrysler Cirrus

WMI: 1C3

Model Years Covered: 1995-2000
Example VIN: 1C3EJ56H0WN176429
Manufacturer Name: FCA US LLC
Vehicle Type: Passenger Car
City: Auburn Hills
State or Province: Michigan
Country: United States

Characters 4-8 are the Vehicle Descriptor Section (VDS) of a 1998 Chrysler Cirrus VIN

These characters correspond to components like:

Engine type
Transmission
Model or trim
Body style
Gross vehicle weight range

Below find the known vehicle descriptor codes for a 1998 Chrysler Cirrus:

Known VDS for a 1998 Chrysler Cirrus
EJ56H

Auto manufacturers have some discretion to decide how they want to code this section, but its contents and decoded results are generally consistent.

Character 9 is the “check digit” in a 1998 Chrysler Cirrus VIN.

Based on a formula developed by the US Department of Transportation, it helps reduce fraud by ensuring the validity of the VIN.

10th Character in the 1998 Chrysler Cirrus VIN — Year Code

Year Code	Year
W	1998

11th Character in the 1998 Chrysler Cirrus VIN — Plant Code(s)

Known 1998 Chrysler Cirrus Assembly Factory VIN Code(s)

Plant Code	Plant City	Plant State	Plant Country	Plant Company Name	Example VIN
N	Sterling Heights	Michigan	United States	Sterling Heights Assembly Plant	1C3EJ56H0WN176429

VIN Characters 12 - 17 of a 1998 Chrysler Cirrus

The final 6 characters in a 1998 Chrysler Cirrus’s 17-digit VIN are its serial number, which will be unique to every vehicle.

Check your Chrysler Cirrus’s VIN below:

How to find a 1998 Chrysler Cirrus’s VIN?

Locating the VIN number on your 1998 Chrysler Cirrus is key for identification. Here’s how to find it:

Look at the dashboard on the driver’s side of your 1998 Chrysler Cirrus. Typically, the VIN can be seen through the bottom corner of the windshield.
Open the driver’s side door and examine the door jamb. The VIN for the Chrysler Cirrus can usually be found on a label or sticker where the door latches.
Check under the hood; there should be a compliance label which often includes the VIN for your vehicle.
Examine the rear wheel well. Occasionally, the VIN is stamped above the tire.
Look in the trunk under the spare tire. Sometimes, the 1998 Chrysler Cirrus will have the VIN in this location.
Inspect your vehicle’s registration documents or insurance card, which should list the VIN for your Chrysler Cirrus.

What info can a 1998 Chrysler Cirrus VIN reveal?

Model Year: The VIN can reveal the vehicle’s model year being the year 1998, providing insights into the age and potential market value of the vehicle.
Engine Configuration: The VIN provides details about the engine, indicating a 2.5L displacement with a V-shaped configuration and 6 cylinders utilizing Sequential Fuel Injection (SFI) for fuel delivery, offering insights into the vehicle’s power and performance capabilities.
Body Class and Doors: The VIN specifies the vehicle as a Sedan/Saloon with four doors, offering detailed insights into the vehicle’s design and size.
Fuel Type: The primary fuel type for this vehicle is Gasoline, which can impact fuel efficiency and environmental implications.
Safety Features: The VIN indicates the presence of front airbags located in the 1st row (Driver and Passenger), showcasing the vehicle’s passive safety mechanisms.
Manufacturing Details: Information about the manufacturing location includes the plant city Sterling Heights, state Michigan, and country United States, pointing to the geographic origin of the vehicle.
Gross Vehicle Weight Rating (GVWR): The vehicle falls within Class 1, indicating a GVWR of 6,000 lb or less, providing an idea about its size and weight classification.

Don’t have your 1998 Chrysler Cirrus’s VIN handy? Try our license plate lookup instead!

Search License Plate

Sample VIN Decode Report for a 1998 Chrysler Cirrus

Vehicle Spec	Value
Body Class	Sedan/Saloon
Displacement (CC)	2500.0
Displacement (CI)	152.55936023683
Displacement (L)	2.5
Doors	4
Engine Configuration	V-Shaped
Engine Number of Cylinders	6
Front Air Bag Locations	1st Row (Driver and Passenger)
Fuel Delivery / Fuel Injection Type	Sequential Fuel Injection (SFI)
Fuel Type - Primary	Gasoline
Gross Vehicle Weight Rating From	Class 1: 6,000 lb or less (2,722 kg or less)
Gross Vehicle Weight Rating To	Class 1: 6,000 lb or less (2,722 kg or less)
Model	Cirrus
Model Year	1998
Other Engine Info	Sales Code: EEB
Other Restraint System Info	CGW except LH
Plant City	Sterling Heights
Plant Company Name	STERLING HEIGHTS ASSEMBLY PLANT
Plant Country	United States
Plant State	Michigan
Seat Belt Type	Manual
Series2	P Series
Trim	LX/LXi
Valve Train Design	Single Overhead Cam (SOHC)
Vehicle Descriptor	1C3EJ56H*WN
Vehicle Type	Passenger Car
Sample_VIN	1C3EJ56H0WN176429