How to decode a 2020 Genesis G80 VIN

Characters 1-3 of a 2020 Genesis G80 VIN

A World Manufacturer Identifier (WMI) is a unique three-letter code that forms the first segment of a Vehicle Identification Number (VIN), designated to identify the manufacturer of a vehicle globally. For the 2020 Genesis G80, the WMI is “KMT,” which indicates that the vehicle was manufactured by Hyundai Motor Co. in South Korea. Specifically, this code points to a passenger car produced in Seoul, Korea, falling within the model years 2019 to 2024. WMIs like “KMT” provide crucial information, not only about the vehicle’s manufacturer but also give insights into the vehicle type and the manufacturing location, contributing to the VIN’s role in vehicle tracking and identification worldwide.

List of WMI Codes for a 2020 Genesis G80

WMI: KMT

Model Years Covered: 2019-2024
Example VIN: KMTFN4JE0LU328708
Manufacturer Name: Hyundai Motor Co.
Vehicle Type: Passenger Car
City: Seoul Korea
State or Province:
Country: South Korea

Characters 4-8 are the Vehicle Descriptor Section (VDS) of a 2020 Genesis G80 VIN

These characters correspond to components like:

Engine type
Transmission
Model or trim
Body style
Gross vehicle weight range

Below find the known vehicle descriptor codes for a 2020 Genesis G80:

Known VDS for a 2020 Genesis G80
FN4JE	FN4JB	FN4JF

Auto manufacturers have some discretion to decide how they want to code this section, but its contents and decoded results are generally consistent.

Character 9 is the “check digit” in a 2020 Genesis G80 VIN.

Based on a formula developed by the US Department of Transportation, it helps reduce fraud by ensuring the validity of the VIN.

10th Character in the 2020 Genesis G80 VIN — Year Code

Year Code	Year
L	2020

11th Character in the 2020 Genesis G80 VIN — Plant Code(s)

Known 2020 Genesis G80 Assembly Factory VIN Code(s)

Plant Code	Plant City	Plant State	Plant Country	Plant Company Name	Example VIN
U	Ulsan		South Korea	Hyundai	KMTFN4JE0LU328708

VIN Characters 12 - 17 of a 2020 Genesis G80

The final 6 characters in a 2020 Genesis G80’s 17-digit VIN are its serial number, which will be unique to every vehicle.

Check your Genesis G80’s VIN below:

How to find a 2020 Genesis G80’s VIN?

Locating the VIN number on your 2020 Genesis G80 is key for identification. Here’s how to find it:

Look at the dashboard on the driver’s side of your Genesis G80. The VIN can usually be seen from outside the vehicle, right where the dashboard meets the windshield.
Open the driver’s side door and check the door post (door jamb) on your 2020 Genesis G80. The VIN is often located on a label or sticker where the door latches when it is closed.
Examine the engine block of your Genesis G80, as the VIN is sometimes stamped directly onto the engine.
Inspect the front of the car frame, near the container that holds windshield washer fluid. The VIN might be found there on your Genesis G80.
Take a look at your vehicle’s title, registration, or insurance documents, which should list the VIN of your 2020 Genesis G80. 6. Check the rear wheel well. Sometimes, the VIN can be located above the tire on the inside of the wheel well on the Genesis G80.

What info can a 2020 Genesis G80 VIN reveal?

Model Year: The VIN can reveal the vehicles model year being the year 2020, providing insights into the age and potential market value of the vehicle.
Body Class and Doors: A VIN can specify the general vehicle type, such as a Passenger Car, and a specific body class, like Sedan/Saloon, offering detailed insights into the vehicle’s design and intended use.
Engine Details: The VIN provides insight into the engine’s specifics, including a displacement of 3800.0 CC (3.8 liters), horsepower starting from 311, and the number of cylinders (6), reflecting its performance capabilities.
Safety Features: The VIN reveals standard safety equipment such as Anti-lock Braking System (ABS), Electronic Stability Control (ESC), airbags located at the front, sides, curtain for 1st and 2nd rows, and a Knee Air Bag for the driver, highlighting the vehicle’s focus on occupant protection.
Fuel Type and Efficiency Technologies: It specifies the primary fuel type, in this case, Gasoline, and may include details on efficiency-enhancing technology like Gasoline Direct Injection (GDI), offering insights into fuel economy and environmental impact.
Drive Type and Transmission: Information on the vehicle’s drive system (RWD/Rear-Wheel Drive) and transmission details, such as an 8-speed Automatic, clarifying the driving dynamics and operational characteristics.
Production Details: The VIN could uncover the production location, including the city (Ulsan), country (South Korea), and the manufacturing company (Hyundai), which can be useful for understanding manufacturing standards and potential import/export considerations.

Don’t have your 2020 Genesis G80’s VIN handy? Try our license plate lookup instead!

Search License Plate

Sample VIN Decode Report for a 2020 Genesis G80

Vehicle Spec	Value
Anti-lock Braking System (ABS)	Standard
Auto-Reverse System for Windows and Sunroofs	Standard
Axles	2
Backup Camera	Standard
Body Class	Sedan/Saloon
Curtain Air Bag Locations	1st and 2nd Rows
Daytime Running Light (DRL)	Standard
Displacement (CC)	3800.0
Displacement (CI)	231.89022755998
Displacement (L)	3.8
Doors	4
Drive Type	RWD/Rear-Wheel Drive
Dynamic Brake Support (DBS)	Standard
Electronic Stability Control (ESC)	Standard
Engine Brake (hp) From	311
Engine Manufacturer	HMC
Engine Number of Cylinders	6
Front Air Bag Locations	1st Row (Driver and Passenger)
Fuel Type - Primary	Gasoline
Knee Air Bag Locations	Driver Seat Only
Model	G80
Model Year	2020
Number of Seat Rows	2
Number of Seats	5
Number of Wheels	4
Other Engine Info	GDI: Gasoline Direct Injection - LAMDA II
Plant City	Ulsan
Plant Company Name	Hyundai
Plant Country	South Korea
Seat Belt Type	Manual
Semiautomatic Headlamp Beam Switching	Standard
Series	3.8, 3.8 Sport, 3.8 Ultimate, 3.3T Sport, 5.0 Ultimate
Side Air Bag Locations	1st and 2nd Rows
Steering Location	Left-Hand Drive (LHD)
Tire Pressure Monitoring System (TPMS) Type	Direct
Traction Control	Standard
Transmission Speeds	8
Transmission Style	Automatic
Valve Train Design	Dual Overhead Cam (DOHC)
Vehicle Descriptor	KMTFN4JE*LU
Vehicle Type	Passenger Car
Sample_VIN	KMTFN4JE0LU328708