How to decode a 1988 Dodge Ram Wagon VIN
Characters 1-3 of a 1988 Dodge Ram Wagon VIN
A World Manufacturer Identifier (WMI) is a unique three-letter or digit code allocated to automotive manufacturers to distinguish their vehicles, as part of the larger 17-character Vehicle Identification Number (VIN). This code is crucial for identifying the manufacturer of the vehicle, its country of production, and the type of vehicle it is. For the 1988 Dodge Ram-Wagon, the WMI “2B4” indicates that it was manufactured by FCA Canada Inc., specifically in their Windsor, Ontario facility. This particular WMI also denotes that the vehicle is classified as a Multipurpose Passenger Vehicle (MPV), highlighting its designed use for carrying passengers. The Dodge Ram-Wagon’s VINs starting with “2B4” assure buyers of its Canadian origin and its manufacturer’s identity, assisting in the vehicle’s identification and history tracking.
List of WMI Codes for a 1988 Dodge Ram Wagon
WMI: 2B4
- Model Years Covered: 1981, 1983-1990, 1992-2002
- Example VIN: 2B4HB11Y3JK184791
- Manufacturer Name: FCA Canada Inc.
- Vehicle Type: Multipurpose Passenger Vehicle (MPV)
- City: Windsor
- State or Province: Ontario
- Country: Canada
Characters 4-8 are the Vehicle Descriptor Section (VDS) of a 1988 Dodge Ram Wagon VIN
These characters correspond to components like:
- Engine type
- Transmission
- Model or trim
- Body style
- Gross vehicle weight range
Below find the known vehicle descriptor codes for a 1988 Dodge Ram Wagon:
| Known VDS for a 1988 Dodge Ram Wagon |
|---|
| HB11Y |
Auto manufacturers have some discretion to decide how they want to code this section, but its contents and decoded results are generally consistent.
Character 9 is the “check digit” in a 1988 Dodge Ram Wagon VIN.
Based on a formula developed by the US Department of Transportation, it helps reduce fraud by ensuring the validity of the VIN.
10th Character in the 1988 Dodge Ram Wagon VIN — Year Code
| Year Code | Year |
|---|---|
| J | 1988 |
11th Character in the 1988 Dodge Ram Wagon VIN — Plant Code(s)
Known 1988 Dodge Ram Wagon Assembly Factory VIN Code(s)
| Plant Code | Plant City | Plant State | Plant Country | Plant Company Name | Example VIN |
|---|---|---|---|---|---|
| K | Windsor | Ontario | Canada | Pillette Road Assembly | 2B4HB11Y3JK184791 |
VIN Characters 12 - 17 of a 1988 Dodge Ram Wagon
The final 6 characters in a 1988 Dodge Ram Wagon’s 17-digit VIN are its serial number, which will be unique to every vehicle.
Check your Dodge Ram Wagon’s VIN below:
How to find a 1988 Dodge Ram Wagon’s VIN?
Locating the VIN number on your 1988 Dodge Ram Wagon is key for identification. Here’s how to find it:
- Look at the dashboard on the driver’s side of your Dodge Ram Wagon, near where the windshield meets the dash. The VIN is commonly located here and can be seen from outside the vehicle.
- Examine the driver’s side door frame on your Dodge Ram Wagon. The VIN can often be found on a label or sticker in the area where the door latches when closed.
- Check under the hood of your Dodge Ram Wagon. The VIN may be stamped onto the chassis or on a plate located in the engine compartment.
- Take a look at the rear wheel well. Sometimes the VIN is stamped above the tire on your Dodge Ram Wagon.
- If your Dodge Ram Wagon was manufactured after 1968, it might have the VIN stamped on the front of the engine block, which can be checked by opening the hood.
- Inspect the frame of the vehicle. In some older models like the 1988 Dodge Ram Wagon, the VIN could also be stamped on the frame, which can be visible underneath the vehicle.
What info can a 1988 Dodge Ram Wagon VIN reveal?
- Model Year: The VIN can reveal the vehicles model year being the year 1988, providing insights into the age and potential market value of the vehicle.
- Engine Details: The engine type for the 1988 Ram Wagon is a V-shaped configuration with a displacement of 5.2 liters (317.323 cubic inches or 5200.0 cubic centimeters), capable of producing up to 170 horsepower. It is manufactured by CMC and uses electronic fuel injection.
- Fuel Type: The primary fuel type for this vehicle is gasoline.
- Body Class and Size: The VIN indicates the 1988 Ram Wagon is classified as a Van with a specific Wagon body style, falling under the Multipurpose Passenger Vehicle category. It also suggests a weight rating within Class 2E, ranging from 6,001 to 7,000 pounds.
- Manufacturing Details: The vehicle was assembled in Windsor, Ontario, Canada, at the Pillette Road Assembly plant.
- Safety Features: The VIN indicates that the 1988 Ram Wagon is equipped with manual seatbelts.
- Trim and Series Information: The VIN discloses the vehicle’s trim level as B150, alongside denoting its series as a Wagon body style.
Don’t have your 1988 Dodge Ram Wagon’s VIN handy? Try our license plate lookup instead!
Sample VIN Decode Report for a 1988 Dodge Ram Wagon
| Vehicle Spec | Value |
|---|---|
| Body Class | Van |
| Displacement (CC) | 5200.0 |
| Displacement (CI) | 317.32346929260 |
| Displacement (L) | 5.2 |
| Engine Brake (hp) From | 170 |
| Engine Configuration | V-Shaped |
| Engine Manufacturer | CMC |
| Engine Number of Cylinders | 8 |
| Fuel Type - Primary | Gasoline |
| Gross Vehicle Weight Rating From | Class 2E: 6,001 - 7,000 lb (2,722 - 3,175 kg) |
| Model | Ram Wagon |
| Model Year | 1988 |
| Other Engine Info | Electronic Fuel Injection |
| Plant City | Windsor |
| Plant Company Name | Pillette Road assembly |
| Plant Country | Canada |
| Plant State | Ontario |
| Seat Belt Type | Manual |
| Series2 | Wagon body style |
| Trim | B150 |
| Vehicle Descriptor | 2B4HB11Y*JK |
| Vehicle Type | Multipurpose Passenger Vehicle |
| Sample_VIN | 2B4HB11Y3JK184791 |
Ready, Set, Bumper...
Try Bumper today and learn more about a vehicle you plan to buy or already own.
TRY Bumper Today