How to decode a 2010 Mitsubishi Lancer VIN

Characters 1-3 of a 2010 Mitsubishi Lancer VIN

A World Manufacturer Identifier (WMI) is the initial set of three characters within a Vehicle Identification Number (VIN) that uniquely identifies the manufacturer of the vehicle. It reveals vital details about the vehicle, such as the make, the vehicle type, and the country of manufacture. For instance, in the WMI of the 2010 Mitsubishi Lancer, “JA3” denotes that the vehicle was manufactured by Mitsubishi Motors Corporation in Japan, specifies it as a passenger car, and points to its assembly in Tokyo. This coding system plays a crucial role in vehicle tracking, registration, and identification across the globe. Knowing a vehicle’s WMI is invaluable for understanding specific information about the vehicle’s origin and manufacturing details.

List of WMI Codes for a 2010 Mitsubishi Lancer

WMI: JA3

Model Years Covered: 2002-2017
Example VIN: JA32W5FV0AU004694
Manufacturer Name: Mitsubishi Motors Corporation (MMC)
Vehicle Type: Passenger Car
City: Minato-Ku
State or Province: Tokyo
Country: Japan

Characters 4-8 are the Vehicle Descriptor Section (VDS) of a 2010 Mitsubishi Lancer VIN

These characters correspond to components like:

Engine type
Transmission
Model or trim
Body style
Gross vehicle weight range

Below find the known vehicle descriptor codes for a 2010 Mitsubishi Lancer:

Known VDS for a 2010 Mitsubishi Lancer
2W5FV	2V6FV	2W8FV	2X8HW	2U8FW	2Y6HV	2W6FV	2U2FU	2U1FU

Auto manufacturers have some discretion to decide how they want to code this section, but its contents and decoded results are generally consistent.

Character 9 is the “check digit” in a 2010 Mitsubishi Lancer VIN.

Based on a formula developed by the US Department of Transportation, it helps reduce fraud by ensuring the validity of the VIN.

10th Character in the 2010 Mitsubishi Lancer VIN — Year Code

Year Code	Year
A	2010

11th Character in the 2010 Mitsubishi Lancer VIN — Plant Code(s)

Known 2010 Mitsubishi Lancer Assembly Factory VIN Code(s)

Plant Code	Plant City	Plant State	Plant Country	Plant Company Name	Example VIN
U	Mizushima		Japan		JA32W5FV0AU004694

VIN Characters 12 - 17 of a 2010 Mitsubishi Lancer

The final 6 characters in a 2010 Mitsubishi Lancer’s 17-digit VIN are its serial number, which will be unique to every vehicle.

Check your Mitsubishi Lancer’s VIN below:

How to find a 2010 Mitsubishi Lancer’s VIN?

Locating the VIN number on your 2010 Mitsubishi Lancer is key for identification. Here’s how to find it:

Examine the dashboard on the driver’s side of your Mitsubishi Lancer 2010. The VIN is typically visible through the windshield on a small metal or plastic plate.
Look at the door pillar on the driver’s side when you open the door of your Mitsubishi Lancer. There should be a VIN sticker or plate where the door latches.
Check under the hood of your Mitsubishi Lancer. It’s possible to find the VIN stamped onto parts of the engine block or on a plate attached to the firewall.
Inspect the trunk area of your Mitsubishi Lancer 2010. The vehicle’s VIN might be on the trunk latch or the floor area where the spare tire is located.
Refer to official documentation for your Mitsubishi Lancer such as vehicle registration, insurance papers, or the owner’s manual, where the VIN is usually recorded.

What info can a 2010 Mitsubishi Lancer VIN reveal?

Model Year: The VIN can reveal the vehicle’s model year as 2010, which provides insights into the age and potential market value of the vehicle.
Body Class and Doors: The VIN indicates that the vehicle is a Hatchback/Liftback/Notchback with 5 doors, offering detailed insights into the vehicle’s design and size, impacting space, utility, and consumer preference.
Engine Specifications: The engine is identified with a displacement of 2.0 liters (2000 CC or 122.047 CI) and features a Dual Overhead Cam (DOHC) design and a Turbocharged/Intercooled (TC/IC) MIVEC system, giving a detailed look into the vehicle’s powertrain capabilities.
Drive Type and Fuel Type: The VIN specifies that the vehicle has a 4WD (Four-Wheel Drive) configuration and uses Gasoline as its primary fuel type, which can affect the vehicle’s performance, efficiency, and suitability for various driving conditions.
Safety Features: Safety features include Curtain Air Bags located in the 1st and 2nd rows, Front Air Bags for the 1st Row (Driver and Passenger), and Side Air Bags in the 1st and 2nd rows, demonstrating the vehicle’s focus on passenger safety from multiple angles.
Additional Features: The vehicle is equipped with a Direct Tire Pressure Monitoring System (TPMS), indicating the inclusion of advanced features designed for driving safety and convenience.
Manufacturing Details: The VIN also uncovers the manufacturing origins, with the plant located in Mizushima, Japan, providing insight into the vehicle’s production lineage, which can be a factor in quality and prestige considerations.

Don’t have your 2010 Mitsubishi Lancer’s VIN handy? Try our license plate lookup instead!

Search License Plate

Sample VIN Decode Report for a 2010 Mitsubishi Lancer

Vehicle Spec	Value
Body Class	Hatchback/Liftback/Notchback
Curtain Air Bag Locations	1st and 2nd Rows
Displacement (CC)	2400.0
Displacement (CI)	146.45698582735
Displacement (L)	2.4
Doors	5
Drive Type	4x2
Front Air Bag Locations	1st Row (Driver and Passenger)
Fuel Type - Primary	Gasoline
Model	Lancer
Model Year	2010
Other Engine Info	MIVEC
Plant City	Mizushima
Plant Company Name
Plant Country	Japan
Seat Belt Type	Manual
Series	Sports
Side Air Bag Locations	1st and 2nd Rows
Tire Pressure Monitoring System (TPMS) Type	Direct
Trim	Sportback
Valve Train Design	Dual Overhead Cam (DOHC)
Vehicle Descriptor	JA32X8HW*AU
Vehicle Type	Passenger Car
Sample_VIN	JA32X8HW0AU001301