How to decode a 2010 Audi S6 VIN

Characters 1-3 of a 2010 Audi S6 VIN

A World Manufacturer Identifier (WMI) is the initial three-character sequence in a Vehicle Identification Number (VIN), which uniquely identifies the manufacturer of the vehicle. In the case of the 2010 Audi S6, the WMI “WAU” signifies that the vehicle was produced by Audi AG, a prestigious automobile manufacturer based in Ingolstadt, Germany. This code is pivotal in decoding the VIN, allowing for the identification of vehicle type, model year, manufacturing location, and other critical details. For the Audi S6 2010, the WMI indicates it is classified as a Passenger Car, aligning with Audi AG’s renowned lineup of luxury vehicles. Such identifiers are crucial for various stakeholders, including regulators, manufacturers, and buyers, for authentication, compliance, and historical data purposes.

List of WMI Codes for a 2010 Audi S6

WMI: WAU

Model Years Covered: 1995, 2002-2003, 2007-2011, 2013-2018, 2021-2024
Example VIN: WAUBNAFB0AN050326
Manufacturer Name: Audi AG
Vehicle Type: Passenger Car
City: Ingolstadt
State or Province:
Country: Germany

Characters 4-8 are the Vehicle Descriptor Section (VDS) of a 2010 Audi S6 VIN

These characters correspond to components like:

Engine type
Transmission
Model or trim
Body style
Gross vehicle weight range

Below find the known vehicle descriptor codes for a 2010 Audi S6:

Known VDS for a 2010 Audi S6
BNAFB	BNBFB

Auto manufacturers have some discretion to decide how they want to code this section, but its contents and decoded results are generally consistent.

Character 9 is the “check digit” in a 2010 Audi S6 VIN.

Based on a formula developed by the US Department of Transportation, it helps reduce fraud by ensuring the validity of the VIN.

10th Character in the 2010 Audi S6 VIN — Year Code

Year Code	Year
A	2010

11th Character in the 2010 Audi S6 VIN — Plant Code(s)

Known 2010 Audi S6 Assembly Factory VIN Code(s)

Plant Code	Plant City	Plant State	Plant Country	Plant Company Name	Example VIN
N	Neckarsulm		Germany		WAUBNAFB0AN050326

VIN Characters 12 - 17 of a 2010 Audi S6

The final 6 characters in a 2010 Audi S6’s 17-digit VIN are its serial number, which will be unique to every vehicle.

Check your Audi S6’s VIN below:

How to find a 2010 Audi S6’s VIN?

Locating the VIN number on your 2010 Audi S6 is key for identification. Here’s how to find it:

Look at the dashboard on the driver’s side of your 2010 Audi S6. The VIN should be visible through the windshield on a small plate positioned near the corner.
Open the driver’s side door and examine the door jamb for a sticker or plaque. The VIN of your Audi S6 is often located where the door latches when closed.
Check the front of the engine block, which should have the VIN engraved on it, as this is a common placement for many Audi vehicles including the S6.
Observe the area around the spare tire well in the trunk of your vehicle. Your 2010 Audi S6 may have the VIN located here on a label.
Examine your vehicle registration documents, insurance papers, or the title (also known as the pink slip); the VIN of your S6 will be clearly listed on these official documents.

What info can a 2010 Audi S6 VIN reveal?

Model Year: The VIN can reveal the vehicle’s model year as 2010, providing insights into the age and potential market value of the vehicle.
Body Class and Doors: A VIN can specify the body class. For the 2010 Audi S6, this may indicate sedan with 4 doors, offering detailed insights into the vehicle’s design and structure.
Drive Type: The drive type can also be identified from the VIN. In the case of the 2010 Audi S6, it could be a 4x2, which can help in understanding the vehicle’s handling characteristics and drive configuration.
Engine Specifications: The vehicle is equipped with a 5.204 liter 10-cylinder engine, providing substantial engine brake horsepower of 435, which may contribute to its performance capabilities.
Fuel Efficiency and Type: Indications suggest that the vehicle runs on gasoline, which is vital for understanding both fuel efficiency and environmental impact to some extent.
Safety Features: Information on safety equipment such as the presence of front and curtain airbags for both driver and passenger in the first row is encoded, highlighting the vehicle’s focus on occupant safety.
Manufacturing Information: The vehicle’s assembly location is pinpointed to Neckarsulm, Germany, providing a clue to its manufacturing heritage.
Unique Identifiers: The provided VIN acts as a unique identifier for the vehicle, enabling detailed tracking and history reports.

Don’t have your 2010 Audi S6’s VIN handy? Try our license plate lookup instead!

Search License Plate

Sample VIN Decode Report for a 2010 Audi S6

Vehicle Spec	Value
Body Class	Sedan/Saloon
Curtain Air Bag Locations	1st and 2nd Rows
Displacement (CC)	5204
Displacement (CI)	317.567564268
Displacement (L)	5.204000
Doors	4
Engine Brake (hp) From	435.00
Engine Model	Audi
Engine Number of Cylinders	10
Front Air Bag Locations	1st Row (Driver and Passenger)
Fuel Type - Primary	Gasoline
Model	S6
Model Year	2010
Other Engine Info	50-St/Can. BIN 5 / LEV II emission std. Emissions Certification Test Group: AADXV05.2385.
Other Restraint System Info	Active Seat Belt, Advanced Front AirBag
Plant City	Neckarsulm
Plant Company Name
Plant Country	Germany
Seat Belt Type	Manual
Series	Prestige Quattro
Side Air Bag Locations	All Rows
Tire Pressure Monitoring System (TPMS) Type	Indirect
Vehicle Descriptor	WAUBNBFB*AN
Vehicle Type	Passenger Car
Sample_VIN	WAUBNBFB1AN049191