How to decode a 2010 Hyundai Santa Fe VIN

Characters 1-3 of a 2010 Hyundai Santa Fe VIN

World Manufacturer Identifier (WMI) codes are unique sequences used to identify the manufacturer of a vehicle globally. For the 2010 Hyundai Santa Fe, the WMI “5NM” signifies that the vehicle was produced by Hyundai Motor Manufacturing Alabama LLC, based in Montgomery, Alabama, United States. This specific WMI indicates the vehicle falls under the category of a Multipurpose Passenger Vehicle (MPV), reflecting its design and capacity for carrying passengers and cargo. The WMI forms the initial part of the Vehicle Identification Number (VIN), which aids in tracking the vehicle’s history, features, and specifications. This information is crucial for various stakeholders, including manufacturers, buyers, and regulatory agencies, providing insights into the vehicle’s origins and characteristics.

List of WMI Codes for a 2010 Hyundai Santa Fe

WMI: 5NM

Model Years Covered: 2007-2010, 2019-2023
Example VIN: 5NMSG3AB0AH333578
Manufacturer Name: Hyundai Motor Manufacturing Alabama LLC (HMMA)
Vehicle Type: Multipurpose Passenger Vehicle (MPV)
City: Montgomery
State or Province: Alabama
Country: United States

Characters 4-8 are the Vehicle Descriptor Section (VDS) of a 2010 Hyundai Santa Fe VIN

These characters correspond to components like:

Engine type
Transmission
Model or trim
Body style
Gross vehicle weight range

Below find the known vehicle descriptor codes for a 2010 Hyundai Santa Fe:

Known VDS for a 2010 Hyundai Santa Fe
SG3AB	SK4AG	SKDAG	SHDAG	SK3AB	SH4AG	SG4AG	SGDAB

Auto manufacturers have some discretion to decide how they want to code this section, but its contents and decoded results are generally consistent.

Character 9 is the “check digit” in a 2010 Hyundai Santa Fe VIN.

Based on a formula developed by the US Department of Transportation, it helps reduce fraud by ensuring the validity of the VIN.

10th Character in the 2010 Hyundai Santa Fe VIN — Year Code

Year Code	Year
A	2010

11th Character in the 2010 Hyundai Santa Fe VIN — Plant Code(s)

Known 2010 Hyundai Santa Fe Assembly Factory VIN Code(s)

Plant Code	Plant City	Plant State	Plant Country	Plant Company Name	Example VIN
H	Montgomery	Alabama	United States		5NMSG3AB0AH333578

VIN Characters 12 - 17 of a 2010 Hyundai Santa Fe

The final 6 characters in a 2010 Hyundai Santa Fe’s 17-digit VIN are its serial number, which will be unique to every vehicle.

Check your Hyundai Santa Fe’s VIN below:

How to find a 2010 Hyundai Santa Fe’s VIN?

Locating the VIN number on your 2010 Hyundai Santa Fe is key for identification. Here’s how to find it:

Look at the dashboard on the driver’s side of your Hyundai Santa Fe, specifically where it meets the windshield. This is a common place to find the VIN through the windshield.
Inspect the door post on the driver’s side where the door latches when it is closed. There should be a sticker or plate on the door jamb with the VIN for your 2010 Hyundai Santa Fe.
Check under the hood of your Hyundai Santa Fe; there may be a VIN plate located on the engine block or other components in the engine bay.
Examine the rear wheel well on the driver’s side. Sometimes the VIN can be found above the tire.
Take a look at the vehicle’s registration documents, insurance cards, or title/ownership papers, as these should all have the VIN listed for your Hyundai Santa Fe.
If you still haven’t located the VIN, it can sometimes be found on the chassis underneath the vehicle or on the firewall inside the engine compartment.

What info can a 2010 Hyundai Santa Fe VIN reveal?

Model Year: The VIN can reveal the vehicles model year, such as the year 2010, providing insights into the age and potential market value of the vehicle.
Engine Details: The VIN might provide information on key engine specifications, for example, a 3.5L V6 engine configured in a V-shape with a dual overhead cam (DOHC) design.
Fuel Type: The primary fuel type for the vehicle can be discerned, with gasoline being the case for this Santa Fe.
Safety Features: Information on safety equipment like curtain and side airbags for both the 1st and 2nd rows, as well as front airbags for the driver and passenger, might be obtained.
Body Class and Doors: The VIN could indicate the body class as a Sport Utility Vehicle (SUV)/Multi-Purpose Vehicle (MPV) with 4 doors, highlighting the vehicle’s design and functionality.
Drive Type: Insights into the drive type, such as a 4x2 drive type, can often be deduced, reflecting on the vehicle’s performance capabilities.
Manufacturing Details: Location details including the plant city (Montgomery), state (Alabama), and country (United States) where the vehicle was assembled might be accessible, offering a glimpse into its production history.

Don’t have your 2010 Hyundai Santa Fe’s VIN handy? Try our license plate lookup instead!

Search License Plate

Sample VIN Decode Report for a 2010 Hyundai Santa Fe

Vehicle Spec	Value
Body Class	Sport Utility Vehicle (SUV)/Multi-Purpose Vehicle (MPV)
Curtain Air Bag Locations	1st and 2nd Rows
Displacement (CC)	3470
Displacement (CI)	211.752392008
Displacement (L)	3.5
Doors	4
Drive Type	4x2
Engine Configuration	V-Shaped
Engine Number of Cylinders	6
Front Air Bag Locations	1st Row (Driver and Passenger)
Fuel Type - Primary	Gasoline
Gross Vehicle Weight Rating From	Class 1D: 5,001 - 6,000 lb (2,268 - 2,722 kg)
Model	Santa Fe
Model Year	2010
Plant City	Montgomery
Plant Company Name
Plant Country	United States
Plant State	Alabama
Seat Belt Type	Manual
Series2	Wagon body Type
Side Air Bag Locations	1st Row (Driver and Passenger)
Tire Pressure Monitoring System (TPMS) Type	Direct
Trim	GLS
Valve Train Design	Dual Overhead Cam (DOHC)
Vehicle Descriptor	5NMSG4AG*AH
Vehicle Type	Multipurpose Passenger Vehicle
Sample_VIN	5NMSG4AG2AH401736