How to decode a 1983 Jeep J-10 VIN
Characters 1-3 of a 1983 Jeep J-10 VIN
World Manufacturer Identifier (WMI) codes are a critical portion of the Vehicle Identification Number (VIN) that uniquely identify the manufacturer of the vehicle. For the 1983 Jeep J-10, the WMI is “1JT,” signifying that the vehicle was produced by FCA US LLC, formerly known as Chrysler Group LLC, located in Auburn Hills, Michigan, United States. This code not only indicates the manufacturer but also confirms that the vehicle type is a truck, catering to the specific design and utility expectations associated with such a designation. Despite the compact nature of this code, WMIs offer a wealth of information about the vehicle’s origins, providing a gateway to understanding the global automotive industry’s structure and distribution. Hence, WMIs serve as an essential tool for vehicle identification, regulatory compliance, and historical research within the automotive sector.
List of WMI Codes for a 1983 Jeep J-10
WMI: 1JT
- Model Years Covered: 1981-1987
- Example VIN: 1JTCN26N6DT039319
- Manufacturer Name: FCA US LLC
- Vehicle Type: Truck
- City: Auburn Hills
- State or Province: Michigan
- Country: United States
Characters 4-8 are the Vehicle Descriptor Section (VDS) of a 1983 Jeep J-10 VIN
These characters correspond to components like:
- Engine type
- Transmission
- Model or trim
- Body style
- Gross vehicle weight range
Below find the known vehicle descriptor codes for a 1983 Jeep J-10:
| Known VDS for a 1983 Jeep J-10 |
|---|
| CN26N |
Auto manufacturers have some discretion to decide how they want to code this section, but its contents and decoded results are generally consistent.
Character 9 is the “check digit” in a 1983 Jeep J-10 VIN.
Based on a formula developed by the US Department of Transportation, it helps reduce fraud by ensuring the validity of the VIN.
10th Character in the 1983 Jeep J-10 VIN — Year Code
| Year Code | Year |
|---|---|
| D | 1983 |
11th Character in the 1983 Jeep J-10 VIN — Plant Code(s)
Known 1983 Jeep J-10 Assembly Factory VIN Code(s)
| Plant Code | Plant City | Plant State | Plant Country | Plant Company Name | Example VIN |
|---|---|---|---|---|---|
| T | Toledo | Ohio | United States | Toledo Assembly Plant | 1JTCN26N6DT039319 |
VIN Characters 12 - 17 of a 1983 Jeep J-10
The final 6 characters in a 1983 Jeep J-10’s 17-digit VIN are its serial number, which will be unique to every vehicle.
Check your Jeep J-10’s VIN below:
How to find a 1983 Jeep J-10’s VIN?
Locating the VIN number on your 1983 Jeep J-10 is key for identification. Here’s how to find it:
- Look at the dashboard on the driver’s side of your 1983 Jeep J-10, near where it meets the windshield. It’s often visible from outside the vehicle.
- Open the driver’s side door and check the door post (where the door latches when it is closed). Sometimes, the VIN can be found on a label or sticker in this area.
- Peer under the hood and examine the front of the engine block, as VINs are sometimes stamped onto the engine itself in older models like your Jeep J-10.
- Check the frame of the vehicle, often beneath the vehicle, around the driver’s side. VIN numbers might be stamped onto the chassis or the frame rail.
What info can a 1983 Jeep J-10 VIN reveal?
- Model Year: The VIN suggests that the vehicle may have been produced in 1983, potentially indicating its age and historical significance.
- Body Class and Vehicle Type: The VIN indicates the vehicle may be a Pickup Truck, giving some insight into its intended use and design.
- Engine Specifications: The VIN provides details of a 6-cylinder engine with an approximate displacement of 4.2 liters, hinting at the engine’s power and size.
- Fuel Type: The vehicle is said to operate on Gasoline, which can offer some understanding of its fuel efficiency and environmental impact.
- Drive Type: It is noted that the vehicle is equipped with 4-Wheel Drive (4WD), suggesting potential capabilities in off-road or challenging driving conditions.
- Transmission Details: The VIN specifies a Manual/Standard Transmission with 5 speeds, providing insights into the vehicle’s performance and driver involvement.
- Production Location: The VIN indicates that the vehicle may have been manufactured in Toledo, Ohio, United States, by the Toledo Assembly Plant, potentially influencing its American origin and collectability.
Don’t have your 1983 Jeep J-10’s VIN handy? Try our license plate lookup instead!
Sample VIN Decode Report for a 1983 Jeep J-10
| Vehicle Spec | Value |
|---|---|
| Body Class | Pickup |
| Brake System Type | Hydraulic |
| Displacement (CC) | 4227.862512 |
| Displacement (CI) | 258 |
| Displacement (L) | 4.227862512 |
| Drive Type | 4WD/4-Wheel Drive/4x4 |
| Engine Number of Cylinders | 6 |
| Fuel Type - Primary | Gasoline |
| Gross Vehicle Weight Rating From | Class 1D: 5,001 - 6,000 lb (2,268 - 2,722 kg) |
| Model | J-10 |
| Model Year | 1983 |
| Plant City | Toledo |
| Plant Company Name | Toledo assembly plant |
| Plant Country | United States |
| Plant State | Ohio |
| Transmission Speeds | 5 |
| Transmission Style | Manual/Standard |
| Vehicle Descriptor | 1JTCN26N*DT |
| Vehicle Type | Truck |
| Wheel Base (inches) From | 131 |
| Sample_VIN | 1JTCN26N6DT039319 |
Ready, Set, Bumper...
Try Bumper today and learn more about a vehicle you plan to buy or already own.
TRY Bumper Today