How to decode a BMW 645Cic VIN
Characters 1-3 of a BMW 645Cic VIN
The World Manufacturer Identifier, commonly referred to as the WMI, is a unique three-letter code allocated to every vehicle manufacturer by the Society of Automotive Engineers (SAE). This code is the first segment of the Vehicle Identification Number (VIN) and reveals key information about the maker of the vehicle. For our BMW 645Cic, WBA serves as the WMI; W denotes that the car was manufactured in Germany, B signifies that the manufacturer is BMW, and A typically indicates the specific division within BMW or the type of vehicle, which, in this case, is a passenger car. These initial three characters of the VIN are essential in providing a clear identity for every vehicle produced, allowing for identification and verification across various services and regulatory processes.
List of WMI Codes for a BMW 645Cic
WMI: WBA
- Model Years Covered: 2005
- Example VIN: WBAEK73405B322962
- Manufacturer Name: BMW AG
- Vehicle Type: Passenger Car
- City: Munich
- State or Province:
- Country: Germany
Characters 4-8 are the Vehicle Descriptor Section (VDS) of a BMW 645Cic VIN
These characters correspond to components like:
- Engine type
- Transmission
- Model or trim
- Body style
- Gross vehicle weight range
Below find the known vehicle descriptor codes for a BMW 645Cic:
| Known VDS for a BMW 645Cic |
|---|
| EK734 |
Auto manufacturers have some discretion to decide how they want to code this section, but its contents and decoded results are generally consistent.
Character 9 is the “check digit” in a BMW 645Cic VIN.
Based on a formula developed by the US Department of Transportation, it helps reduce fraud by ensuring the validity of the VIN.
10th Character in the BMW 645Cic VIN — Year Code
| Year Code | Year |
|---|---|
| 5 | 2005 BMW 645Cic |
11th Character in the BMW 645Cic VIN — Plant Code(s)
Known BMW 645Cic Assembly Factory VIN Code(s)
| Plant Code | Plant City | Plant State | Plant Country | Plant Company Name | Example VIN |
|---|---|---|---|---|---|
| B | Dingolfing | Germany | WBAEK73405B322962 |
VIN Characters 12 - 17 of a BMW 645Cic
The final 6 characters in a BMW 645Cic’s 17-digit VIN are its serial number, which will be unique to every vehicle.
Want to unlock even more detailed info about your vehicle?
How to find a BMW 645Cic’s VIN?
Locating the VIN number on your BMW 645Cic is key for identification. Here’s how to find it:
- Look at the dashboard on the driver’s side of your BMW 645Cic, near where it meets the windshield. This is a common place to find the VIN, typically visible through the windshield.
- Examine the driver’s side door jamb on your BMW 645Cic. It’s common to find a sticker or label there with the VIN where the door latches shut.
- Check the front of the engine block, as the VIN can sometimes be found engraved on the engine itself in BMW vehicles.
- Review your BMW 645Cic’s vehicle registration documents, insurance papers, or title, where the VIN is usually listed.
- Inspect the rear wheel well on the driver’s side. You might be able to see the VIN looking upwards through the wheel well.
- Look for the VIN on the car frame, near the windshield washer fluid reservoir, which is accessible when you open the hood of your BMW 645Cic.
- Check underneath the spare tire in the trunk or boot area of your BMW 645Cic, as sometimes the VIN is located there.
What info can a BMW 645Cic VIN reveal?
- Make: The VIN may reveal the manufacturer of the vehicle, possibly being BMW.
- Model: The VIN provides the specific model of the vehicle, which seems to be the 645Cic.
- Model Year: The VIN may indicate the model year of the vehicle, potentially being the year 2005.
- Plant City: The VIN possibly identifies the city where the vehicle was manufactured, in this case Dingolfing.
- Vehicle Type: The VIN seems to specify that the vehicle is a passenger car.
Don’t have your BMW 645Cic’s VIN handy? Try our license plate lookup instead!
Sample VIN Decode Report for a BMW 645Cic
| Vehicle Spec | Value |
|---|---|
| Body Class | Convertible/Cabriolet |
| Displacement (CC) | 4400.0 |
| Displacement (CI) | 268.4 |
| Displacement (L) | 4.4 |
| Doors | 2 |
| Engine Brake (hp) From | 325 |
| Engine Number of Cylinders | 8 |
| Front Air Bag Locations | 1st Row (Driver and Passenger) |
| Fuel Type - Primary | Gasoline |
| Gross Vehicle Weight Rating From | Class 1C: 4,001 - 5,000 lb (1,814 - 2,268 kg) |
| Model | 645Ci |
| Model Year | 2005 |
| Other Restraint System Info | Dual-stage suppl. restraint system (SRS) certified to the advanced airbag requiremnets of FMVSS 208, S14. |
| Plant City | Dingolfing |
| Plant Company Name | |
| Plant Country | Germany |
| Seat Belt Type | Manual |
| Series | 6-Series |
| Tire Pressure Monitoring System (TPMS) Type | Indirect |
| Vehicle Descriptor | WBAEK734*5B |
| Vehicle Type | Passenger Car |
| Wheel Base (inches) From | 109.4 |
| Sample_VIN | WBAEK73405B322962 |
Decode a BMW VIN
Ready, Set, Bumper...
Try Bumper today and learn more about a vehicle you plan to buy or already own.
TRY Bumper Today